• Contactor-less DBT2003 controller and operator’s control stick
• No trailing cables for unlimited flexibility traversing the mine
• Un-A-Hauler® operators are comfortably and safely enclosed in a
   thick steel envelope with a clear view front and back
• Convenient scoop-type controls; and to change directions, the
   operator simply turns their head
 

810C
Mining Height: 55” to 80”
Frame Height: 47” to 54”
Capacity: 20 Ton/ 574 cu.ft.

810C
Mining Height: 75” to 110” 1
Frame Height: 50” to 54”
Capacity: 5 Ton / 574 cu.ft.
 

• Up to 20 tonne maximum payload
• Certified power packages available with state of the art dry
  scrubber system and DPM filtration
• Rugged, reliable drive unit with chainless drive system
• Quick response hydraulic steering and true tracking geometry
  provide optimum maneuverability
• Fully encapsulated 6 plate wet-running disc brakes
• Cockpit positioned for optimum visibility and protection
• Electronic safety system with automatic cut-off
• Additional rear gate

Un-A-Trac®
With over 40 years’ experience and over 6500 battery-powered units produced, the Bucyrus scoop Un-A-Trac® is the obvious choice for a low-maintenance high-productivity utility vehicle. The products from America’s No. 1 manufacturer of battery-powered mining machinery are setting the pace in efficient and reliable underground utility vehicles. The 488L is the strongest and most rugged low-profile scoop ever built.

Un-A-Trac Brochure (A4)

• Oversize center sections
• Tape switch type emergency stops
• Wet-disc service brakes
• DBT2003 IGBT electric controllers
• Multi-purpose contoured bottom bucket
• Planetary wheel drives
• Ground-level battery change system
 

488-6
Optimal seam height: 54” (1.3m) and up
Capacity: 16 tons (short) / 13.6 tons (metric)

488D
The new Diesel Un-A-Trac offers an alternative to battery powered low seam utility vehicles.

• Diesel powered with Dana transmission
• High capacity up to 14.5 tonne lift capacity
• Low frame height of 953mm
• Flexible range of attachments with the DBT Quick Attach
  System
• DBT axle with 36 tonne load rating
• Rotek center bearing rated at (26 tonne axial, 60 tonne radial)
• AHR Fail Safe outboard brakes
• Ergonomically designed cab with DBT stick control
• Industry leading batteries and chargers

• Carry capacity: Sub 8 tonnes
• RAS/QDS attachment lifting plate
• Forks: 8 tonnes @ 600mm from fork face
• Engine: Option of four cylinder 107kW or six cylinder 132kW MWM
  Diesel, engine, turbocharged, after-cooled, 4 cycle
• Transmission: DANA 32000 Series, 4 speed electronic push-
  button or automatic powershift with forward / reverse mode
• Axles: DANA 113 Series, heavy-duty with ‘Positorq’ differentials
  and ‘Posistop’ brake units
• Tires: Michelin 1400mm x 24R
• Rapid Attachment System

FBL 10
The FBL 10 is a multi-functional vehicle designed to maximize speed, power and carrying capacity in a compact envelope. The modern coal mine needs versatile equipment. With the RAS (Rapid Attachment System) fitted, the FBL 10 allows rapid changes from bucket to forks to jib crane to belt reeler. Used in conjunction with the CHT 50 Shield Trailer, the FBL 10 is a high-speed shield transport combination. - view specs

FBL 10 Brochure

FBL 15
The FBL 15 has the highest speed of any underground coal machine in the world. Versatility and speed were key design criteria for the FBL 15. Speed and power are required to move longwall shields, already weighing up to 40 tonnes and expected to increase in weight. When coupled with the CHT 50, the two form a high-speed combination for quick and safe haulage of shields weighing up to 50 tonnes. The RAS system ensures versatility and maximum utilization of the unit. - view specs

FBL 15 Brochure

• Ejector plate bucket
• Side shift forks
• Belt reeler
• Cable reeler
• Jib crane [static and slewing]
• Work baskets
• Fuel and lubrication module
• Materials pod system
• Concrete hopper
 

view specs